 |
800-348-5016 |
|
 |
Water Skis
Displaying product detail.
|
Home>Water Skis>Water Ski Bindings
 |
|
Goode PowerShell IV Interloc™ Screwless Binding System
Hard shell bindings will release from ski during hard falls. Features adjustable buckles. Choice of two different removable inner liners. Heat moldable (Thermo) or traditional. Includes micro-adjustability for canting and angling boot placement on the ski. Carbon fiber binding plate attaches to ski with screwless Inter-Loc system.
The GOODE PowerShell™ 4 Binding System is made of hard shell boots, attached with adjustable stainless screws to a G-10 composite binding plate. The binding plate attaches to the ski with the patented Inter-Loc™ System. The InterLoc™ attaches to the plate and to the ski with an adhesive. This material has incredible holding power, about 35 lbs. per square inch. When pressed together, hundreds of mushroom-shaped stem interlock with one another. An audible snap announces that the Inter-Loc™ is locked.
In the event of a hard fall, the binding plate will separate from the ski. Two "Puzzle Pieces" help relocate the binding plate. You can adjust the force that the PowerShell™ 4 releases by adding or removing the amount of InterLoc™ between the binding plate and ski. As a rule, you should have about 1-1/2" length of InterLoc™ material behind your rear foot. If your binding plate releases too easily then you can add additional InterLoc™ . If you feel that you have fallen and the ski should have released, you can remove InterLoc™ by trimming it with a razor knife and peeling if off either the ski or the binding plate.
The PowerShell™ 4 Binding System allows for micro adjustments of the individual boots forward, backward and angling them side to side, allowing you to precisely adjust your balance and stance.
Skiers with double boots have two adjustment options for their rear boot heel raise: 1.) Fixed heel option or 2.) Heel raise option. The fixed heel option does not allow the skiers back foot heel to raise off of the ski. With the ski heel raise option (recommended) installed, skiers can adjust their rear spring tension to allow their rear heel to raise. This slight heel raise permits the skier to place weight on the front of the ski allowing it to slow at the buoy.
XS (4-6), SM (6.5-8), MD (8.5-10), and LG (10.5-13). Sold as a set. Specify Left Or Right Foot Forward.
Drop shipped from manufacturer, please allow 2 weeks for delivery.
|
|
| Item |
Description |
Bart's |
Add to Cart |
| GD0P27 |
PowerShell Front and Rear Binding Standard |
$390.00 |
|
| GD4P27 |
PowerShell Front and Rear Binding Thermo |
$450.00 |
|
| GD0P26 |
PowerShell Front Binding with Rear Toe Plate Standard |
$305.00 |
|
| GD4P26 |
PowerShell Front Binding with Rear Toe Plate Thermo |
$330.00 |
|
|
|
|