Simply shaped to advance your skills on the wake - Build a solid base. Shaun Murray and Greg Nelson agree that a solid foundation greatly increases a rider's learning curve. Hyperlite introduces the Baseline, shaped specifically for creating that base and solid foundation. The Baseline has a wider overall profile built atop a continuous rocker, delivering a smooth carving board that gets more pop off the wake due to its increased surface area. The variable edge design is forgiving between the inserts but then sharpens towards the tip and tail to provide the strong edge hold necessary for generating speed into the wake. The Baseline is simple and both Murray and Nelson believe that "Less is More" in shaping philosophy. The center of the base is clean, clean water flow creates a smooth ride and softer landings, the dual tunnels easily allow water to enter and exit at the Baseline's tip and tail. Take it from two legends, the Baseline is the board for your Wakeboard adventure.
Hyperlite's fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass every Hyperlite deck will have the same pop off the double up year after year.
BIOLITE 3 CORE
The secret recipe we have been perfecting since day one. This core material is the gold standard in the industry and used throughout our line. Bio 3 is our lightest and most durable formula to date.
Integrating the top glass and the bottom glass into one. Generating a more durable board on side impacts to prevent delamination.
The rocker line that started it all. Speed and fluid, predictable pop truly define this rocker. Designed to carry great speed into the wake with minimal drag, a Continuous rocker generates a longer trajectory with similar pop every time.
SINGLE TUNNEL WITH COMPLETE EXIT
REDUCED TIP & TAIL THICKNESS
DUAL FIN POSITIONING
VARIABLE EDGE DESIGN
131cm - Up to 175 pounds
136cm - 145 pounds and up
141cm - 160 pounds and up
Shaun understands that many people share their bindings, so the Team delivers high-end ride support with an open toe, offering you more freedom and flexibility. The Team open toe binding was built for a rider looking for the feel and functionality of a supportive mid flex boot with the adjustability of an open toe. The slightly higher cuff and Seamless Liner Construction allows for additional support with a comfortable fit. The adjustable open toe design makes it a great choice to accommodate a wide array of foot sizes. Dual quick cinch lace zones allow for easy entry and exit at the beginning or end of your set. The Team Binding also utilizes the new Low Pro Plate System for a lighter weight feel and the closest foot to board connection possible.
LOW PRO PLATE SYSTEM
The Low Pro Plate system takes much of what we learned from the System binding and incorporates it into a more traditional design. We began by reducing the overall volume by nearly 16%, which translates into a much lighter boot. Our drop-through footbed keeps a rider closer to the deck for maximum control and response. To ensure the baseless design did not produce unwanted plate twist we connected the sidewalls to the chassis, creating a stronger foundation.
ALUMINUM CLAW INSERTS
NEW FOR 2020
HEEL HOLD ZONE
DUAL DENSITY EVA
DUAL DENSITY FOOTBED
DUAL QUICK CINCH LACE ZONES
FLOW THROUGH DRAIN PANELS
Sizes: 4(4-8), 7(7-10.5), 10(10-14)
Item Number: HL0495