The asymmetrical design and special flex make it the perfect choice to advance your skills. Creating a girl's shape to take their skills to the next level was the goal behind the new Eden 2.0. Learning from other asymmetrical designs, Hyperlite found that creating a shorter but more effective edge on a rider's toe-side made hard to learn wake jumps that much easier. This is because there is less rail to initiate when applying toe-side pressure. Once set, the smoother toe-side transition is then held by the Eden 2.0's thinner profile molded-in fin, creating less drag and a better release off the top of the wake. Subtle Toe-Side Footbed Risers were also added to help a rider create more leverage when pressure is applied. The longer, more traditional heel-side edge compliments this asymmetrical design by allowing the natural body position of a rider to generate stability and speed into the wake without a loss of pop due to reduced surface area. The Eden 2.0 has been tested and proven to be the best choice for a rider looking to master the foundations of wakeboarding.
Hyperlite's fiberglass is available in 3 weights depending on the board. Over time, traditional woven glass fibers will separate. With layered glass every Hyperlite deck will have the same pop off the double up year after year.
Integrating the top glass and the bottom glass into one. Generating a more durable board on side impacts to prevent delamination.
Tailored specifically to a female rider's needs. A softer glass layup creates a more supple flex and a board built to their top female riders' standards.
ABRUPT CONTINUOUS ROCKER
This rocker line adds a little more kick to the speed that so many riders look for. The Abrupt Continuous rocker line transitions to a slightly exaggerated tip and tail rocker, creating added pop without sacrificing speed into the wake.
MOLDED-IN TOE SIDE FOOTBED RISERS
125cm - Up to 130 pounds
130cm - Up to 155 pounds
135cm - 145 pounds and up
A hassle free and comfortable fit, perfect for your first time behind the boat. The Jinx Kids boot is a supportive but easy-to-get-into adjustable boot. It features Dual Lace Zones like more expensive boots, plus the plushness you come to expect from an open-toe. The 3D molded tongue provides maximum comfort with no sacrificed board control. The Jinx Kids is an excellent choice for beginner to intermediate riders looking for a comfortable, user-friendly option.
LOW PRO PLATE SYSTEM
The Low Pro Plate system takes much of what they learned from the System binding and incorporates it into a more traditional design. Hyperlite began by reducing the overall volume by nearly 16%, which translates into a much lighter boot. Their drop-through footbed keeps a rider closer to the deck for maximum control and response. To ensure the baseless design did not produce unwanted plate twist they connected the sidewalls to the chassis, creating a stronger foundation.
HYPERPLUSH REAR FLEX ZONE
DUAL DENSITY EVA
6IN UNIVERSAL MOUNTING SPREAD
ADJUSTABLE FLOATING TOE DESIGN
GLASS FILLED NYLON CLAW INSERTS
QUICK CINCH CENTER LACE ZONE
Item Number: HL0543